1.When the diameter of the ball mill is less than 3200mm ,its conventional configuration is using rolling bearing instead of bearing bush sliding bearing, energy saving 10% - 20%;
2.When the diameter of the ball mill is more than 2700mm ,its conventional configuration is using slow driving for maintenance, installing liner use;
3.When the diameter of the ball mill is less than 1500mm ,its conventional configuration is monolithic large chassis, reducing the installation time and installation requirements;
4.When the power of the ball mill is less than 400 kW ,it uses the cage or wire wound asynchronous motor,when more than 400 kW it can use high voltage (6 kv and 10 kv) asynchronous motor or the TDMK series high pressure (6 kv and 10 kv) synchronous motor;
5.A drum type feeder or joint feeder available, meeting different condition needs;
6.The gear lubrication mode has grease lubrication, oil lubrication and oil mist lubrication for choice, meeting different condition needs;
7.The bearing lubrication has manual and electric grease lubrication pump for choice, can realize lubrication automation;
8.There are a variety of liner type for choice, B series energy-saving type than A series standard type can save energy 10% - 20%.

Model	Effective volume(m3)	Ball load(t)			Capacity(t/h)			Power(kW)	Weight(t)
		MQG	MQY	MQS	MQG	MQY	MQS
Φ900×1800	1	1.3	1.7	2	0.9-1.6	1.7-3.2	2-3.7	15	4.2
Φ900×2100	1.1	1.5	1.9	2.3	1-1.9	2-3.7	2.3-4.3	18.5	4.9
Φ900×3000	1.6	2.2	2.8	3.3	1.4-2.7	2.9-5.4	3.3-6.2	22	7.6
Φ1200×2400	2.4	3.3	4.1	4.9	2.2-4	4.3-8	5-9.2	30	8.7
Φ1200×3000	3	4.1	5.2	6.2	2.7-5	5.4-10	6.2-12	37	13
Φ1200×4500	4.4	6.2	7.7	9.3	4-7.5	8.1-15	9.3-17	45	14
Φ1500×3000	4.8	6.6	8.3	10	4.3-8	8.6-16	10-19	75	15
Φ1500×4500	7.1	10	12	15	6.5-12	13-24	15-28	115	20
Φ1500×5700	9	13	16	19	8.2-15	16-31	19-35	135	24
Φ1830×3000	7.1	10	12	15	6.4-12	13-24	15-28	115	28
Φ1830×4500	10.6	15	18	22	10-18	19-36	22-41	155	32
Φ1830×6500	15.3	21	27	32	14-26	28-52	32-60	210	35
Φ1830×7000	16.5	23	29	34	15-28	30-56	35-64	210	37
Φ2100×3000	9.4	13	16	20	9-16	17-32	20-37	180	42
Φ2100×3600	11.3	16	20	24	10-19	21-38	24-44	210	48
Φ2100×4000	12.6	18	22	26	11-21	23-42	26-49	210	50
Φ2100×4500	14.1	20	25	30	13-24	26-48	30-55	210	52
Φ2100×7000	22	31	38	46	20-37	40-74	46-86	280	57
Φ2200×3600	12.5	17	22	26	11-21	23-42	26-49	210	52
Φ2200×4500	15.6	22	27	33	14-26	28-53	33-61	245	54
Φ2200×6500	22.5	31	39	47	20-38	41-76	47-88	320	60
Φ2200×7000	24.2	34	42	51	22-41	44-82	51-95	320	63
Φ2200×8000	27.8	38	48	57	26-46	49-90	57-104	380	67
Φ2400×3600	15	21	26	31	14-25	27-51	31-58	245	60
Φ2400×4500	18.7	26	33	39	17-32	34-63	39-73	320	71
Φ2400×6000	24.9	35	43	52	23-42	45-84	52-97	400	84
Φ2400×7000	29.1	41	51	61	26-49	53-98	61-113	400	92
Φ2700×3600	18.8	26	33	39	17-32	34-64	40-73	400	82
Φ2700×4500	23.5	33	41	49	21-40	43-80	49-92	450	90
Φ2700×6000	31.4	44	55	66	29-53	57-106	66-122	560	105
Φ2700×7000	36.6	51	64	77	33-62	67-124	77-143	630	110
Φ3200×4500	33.5	47	58	70	31-57	61-113	70-131	800	137
Φ3200×6000	44.7	62	78	94	41-76	81-151	94-174	1000	160
Φ3200×7000	52.2	73	91	109	47-88	95-176	110-203	1250	185
Φ3600×4500	42.8	60	75	90	39-72	78-145	90-167	1000	200
Φ3600×6000	57.1	80	100	119	52-96	104-193	120-223	1250	220
Φ3600×7000	66.6	93	116	139	61-113	121-225	140-260	1400	245
Φ3600×8000	76.1	106	133	159	70-129	138-257	160-297	1800	270
Φ3600×9000	85.6	120	149	179	78-145	156-289	180-334	1800	285
Φ3800×6500	69.1	96	121	145	63-117	126-234	145-270	1400	277
Φ3800×8500	90.4	126	158	189	82-153	165-306	190-353	1800	300

Note: equipment actual processing capacity,power,weight and process configuration have great relationship with equipment configuration, the above data are only for reference .